HUBERT HAAS REPLACEMENT PARTS
All Hubert Haas replacement parts are available upon request.
Do you have another brand of scalder or stunner? Contact me. I may have the parts available,
Listed below are parts normally in stock
COPPER ELECTRODES FOR STUNNER
Copper Electrodes for the TBG 100 and TBG 200 Hog and Sheep Electric Stunner. Price is for one set of two electrodes and also includes the three replacement screws.
$99.00
- 1 lb
- Available
- Ships within 1-3 days1
DEHAIRING BLOCKS FOR HOG SCALDING AND DEHAIRING MACHINE
Replacement Dehairing Block for Hubert Haas and other makes Hog Scalding and Dehairing Machine. Also fits other makes of hog scalder dehairers such as Abele. Price is for one only. Dimensions are in photos. Distance center bolt to center bolt is 40 mm or 1.57 inches
$25.00
- Available
- Ships within 1-3 days1
Dehairing Block for Hubert Haas Large Machines as well as other makes
Dehairing Block for Hubert Haas large machines such as the David, Goliath and Presentation Machine. Also fits other makes. Superior quality and durability. Holes center to center 65 mm.
$59.00
- 2 lb
- Available
- Ships within 1-3 days1
Dehairing Block Baumann Standard
Dehairing Block for Baumann Hog Scalder Dehairer. Length = 150 mm. Width=128 mm. Distance hole to hole=80 mm. Thickness=32mm
$45.00
- 0.8 lb
- Available
- Ships within 1-3 days1
Dehairing Block Baumann-MINI
Dehairing Block For Baumann-Mini. Length=158mm. Width=58mm. Distance hole to hole = 30 mm. Thickness = 36 mm.
$39.00
- 0.8 lb
- Available
- Ships within 1-3 days1
Dehairing Block JWE/AWE Baumann
Dehairing Block JWE/AWE Baumann. Length=95mm. Width=102 mm. Hole to Hole = 50 mm.
$25.00
- 0.8 lb
- Available
- Ships within 1-3 days1
RUBBER SEALS FOR STUNNER ELECTRODES
Rubber Seal for Stunner Electrodes. Price is for a set of two.
$8.00
- 1 lb
- Available
- Ships within 1-3 days1
REPLACEMENT CABLE FOR STUNNER TONGS
Replacement Cable Extends from the Plug Going into the Stunner Box and to the Stunner Tongs. Cable extends to twenty feet.
$99.00
- 2 lb
- Available
- Ships within 1-3 days1
STUNNER ELECTRIC BOARD
Electric Control Board inside the Hubert Haas Stunner
$795.00
- 1 lb
- Available
- Ships within 1-3 days1
STUNNING TONGS-STANDARD FOR HOGS 30 TO 650 POUNDS
Stunning Tongs Complete. Includes Tongs, Electrodes, Cable and Plug. Contactors made of copper for better electric conductivity. Tongs are 31 inches long. Contactor to Contactor is 24 inches at full extension. Cable extends to a length of twenty feet.
$795.00
- 10 lb
- Available
- Delivery in approximately 1 week1
STUNNING TONGS-SMALL FOR PIGLETS LESS THAN 30 POUNDS
Stunning Tongs Complete. Includes Tongs, electrodes, cable and plug. Contactors made of copper for better electric conductivity. Tongs are 27 inches long. Contactor to Contactor is 16 inches at full extension. Contactors are 3/4 inches apart in closed position
$895.00
- 10 lb
- Sold Out
STUNNING TONGS-LARGE FOR HOGS GREATER THAN 650 POUNDS
Stunning tongs complete. Includes tongs, electrodes, cable and plug. Electrodes made of copper for better electric conductivity. Tongs are 36 inches long. Contactor to contactor is 32 inches at full extension.
$895.00
- 10 lb
- Sold Out
LUBRICANT FOR THE HOG SCALDER DEHAIRER
Lubricant/Grease for Shaft, Ball Bearings and Chain of the Hog Scalder Dehairer
$10.00
- 5 lb
- Available
- Ships within 1-3 days1
FUSE FOR THE STUNNER CIRCUIT BOARD
Replacement Fuse for the Stunner Circuit Board
$2.00
- 1 lb
- Available
- Ships within 1-3 days1
Fuse 35 amp for Hog Scalder Dehairer
35 amp fuse for hog scalder dehairer
$2.25
- 1 lb
- Available
- Ships within 1-3 days1
All Hubert Haas replacement parts are available upon request
Share on: